food pipe

food pipe

Water Pipes System

Posted on December 31, 2018 in Uncategorized

Approximately in all homes, leakage of water and gas can provide the ultimate water related damage, especially when it is not exactly diagnosed. Most water damages are due to first and foremost leakage in the house’s water ways system such as those seen in plumbing system and sewage. Weather linked water breakage are pretty something that we can hardly do some work about. Many other reasons like snowstorms, hurricanes, tornadoes and windstorms bring about remarkable water connected hurt to houses, shops etc.

The house is planned with an complex network of piping’s, hoses that flow water to and from the home to be applied by all points of the house and for the functions from cleaning clothes to cooking food to washing the motorcar etc. Your plumbing system has basically three functions: supplying, draining, and venting. Your house system of the Plumbing supplies water to the house and distributed through the hot and cold pipes

The draining system supply water out from your entire house and drains it in a main line that empty into a local sewage system. Your house’s venting system throws in air into the waste pipes so that waste and dust will be run away. Pipes are conduits, passageways that carry pressurized water to the home and distribute this to the different fixtures inside the house that need water to be used by your family.

In ancient days, pipes were built of lead because of its malleability or the power to be reshaped with pressure. However, lead-related health troubles such as stillbirths and higher incidence of infant deaths have spurred the development of new technology that contains tin alloy and tin antimony to joint copper in order to reduce the ill results of lead on health.

PVC pipes provide several distinct advantages over other kinds of water pipes. These pipes do not conduct electricity that can be produced by acids, alkalis, and salts that can oxidize metal pipes. Moreover, Good water flow in polyvinyl chloride pipes because of the comparatively smoother inside surface of the pipe reducing the friction and improving overall water flow. Polyvinyl chlorides can be used in any kind of construction process, especially in plumbing systems.

PVC pipes are also challenging to burn and will not stay to ignite without an external ignition source. The spontaneous firing temperature of polyvinyl chloride is 454°C, well above the burning temperatures of most building materials. PVC pipes are also recommended to as an eliminating water pipe because the products of combustion instantly combine with any available oxygen in the atmosphere in order to famish the flame.

Stainless steel pipes provide lightweight, durable design results that also contribute to environmental welfare through lack of pollution of drinkable water, reduced environmental impact of the water industry and recyclability. Stainless steel provide excellent corrosion resistance, tolerance of full run rates, right posture and ductility, ease of manufacturing, ready accessibility in a bigger range of forms, excellent durability, and full recyclability. The use of PVC and stainless steel water pipe all boil down to one thing: What rate you value your health and how much you are willing to pay for installing the most appropriate water work arrangement for your house. Both PVC and stainless steel pipes provide long life, easy installation, flexibleness and lastingness, and relative stability.

Measurements and Facts About PVC Pipes

Posted on December 28, 2018 in Uncategorized

Sizes of Polyvinyl chloride or PVC pipes have many variations. From building a simple home to constructing a mega structure, PVC pipes are always being used. Thus, depending on its function or purpose, the pipe sizes also change. The following statements would present basic things about PVC pipes and some of the usual sizes.

Composition and Materials

Pipe structure is made up of PVC pipes that are fixed with valves or regulators and other factors. Nonetheless, various substances or materials made up the pipe in itself. Its composition greatly depends on the use or purpose. For water piping system the ABS or acrylonitrile butadiene styrene is being used. This is very ideal because of its properties which carry low temperatures. ABS is the one being used for residential homes for draining system. This type of PVC pipe has a tight airline as well. The uPVC or ‘unplasticized’ polyvinyl chloride is also referred as the stiff or rigid PVC. It is characterized as very strong regardless of its pipe measurement. It could also endure variety of chemicals. The cPVC or polyvinyl chloride, post chlorinated is also versatile that it can also sustain various types of chemicals (salts, alcohols, acids and others). Nonetheless, hydrocarbons are the substance it could not take. These are just practical information that should always be noted.

Other Known PVC Pipe Materials

Polypropylene is an additional option that can be suitable for geothermal functions. This type has proven to be appropriate for rainwater system, hydronic cleaning and for food. Polypropylene is also used in pharmaceutical facilities and the like. This kind of material is very tough for variety of chemicals, but not for ultraviolet waves. For this reason, polypropylene is mounted below ground or indoors. These pipes can be used for gas transmission as well. Polyvinylidene fluoride functions as a homopolymer and also for transferring strong substances or chemicals. Polybutylene pipes are almost similar to polyethylene; nonetheless, because of its vulnerability due to aging and leaking, they are now obsolete. Nowadays, same type of pipes exist but with improved composition. As a general note, especially with regards to the right pipes (in term of composition) to use, it is always wise to take an experts advice (from engineers and the like).

The Usual PVC Measurements

CPVC and PVC that has NPS 14 schedule 80, the OD (or outside diameter) is about 14.000. 0.750 is the minimum wall and 12.500 is the nominal ID (inside diameter). NPS 16 schedule 80 PVC pipes have 16 OD and 0.843 minimum wall breadth and these pipes have a 14.314 nominal ID. CPVC and PVC pipes that have NPS 14 schedule 40 have an OD of 14. These pipes have a 0.438 minimum wall thickness. 13.124 is the nominal ID of this pipe measurement. For pipe that is NPS 16 the OD is 16 and 0.500 is the minimum wall thickness. 15.000 is the NPS IID. As a final note, installing pipes should be better left with the experts. However, for basic home fixes regarding pipes, doing some research could really be helpful.

[Top]

Pipe Insulation Foam: Find Out Basic Facts About Phenolic Pipe Insulation Foam

Posted on December 26, 2018 in Uncategorized

Insulation of the piping system has been found to be beneficial to the owners and occupants of an establishment. Although there is an upfront investment involved, as time goes by, it will generate substantial returns from lower energy consumption. Not only will proper insulation bring down heating and cooling costs, it will also create a more peaceful, comfortable and healthier environment because of its sound deadening capability.

For this undertaking, pipe insulation foam technology is the one currently being recommended by the experts. Insulation foam materials being traditionally used are the polyurethane, phenolic, polyethylene and polystyrene. The most popular one is the polyurethane foam material. They usually come in rigid and sturdy pipe fitting tubing with or without adhesive strips. Some come in blocks or sheets. You can purchase them in various sizes. The tubular foam is very easy to install. All you need to do is the slide the pipe into the foam tube and bind it with the self sealing adhesive strip. With a sheet, you just measure and wrap it around the pipe and secure it with the adhesive tape. A low density foam material can give you a R-value rating of 2.5-3.5 which is ideal for residential purposes. High density materials would be perfect for industrial and commercial use.

If moisture resistance is a priority issue, you can research on the phenolic insulation foam technology. Some companies have patented phenolic foam products for insulation which are gaining inroads in the market today. It can be used in a wide range of various applications such as hot and cold water piping including underground pipe lines, for petroleum and chemical transportation pipelines, food processing plants and any piping system that can be insulated. The high density closed cell phenolic foam materials are made of phenolic resin which is non-combustible. They have a high fire-retardant and flame resistance rating. Phenolic foam is a highly efficient energy saver and protector against pipe failure and corrosion.

Phenolic foam insulated pipes have been tested to perform well in cold and water pipes, in gas and oil pipelines, in low temperatures and the cryogenic environment. Tests were conducted including an experiment to test the performance of the patented materials at temperatures of -153 C. They used a Dewar thermos bottle with a -196 C liquid nitrogen, buffer tank thermometer and S-shaped phenolic pipe. The pipe had 28 insulation layers at 40mm and measured 30 meters. After 12 hours, it was concluded that the pipes have excellent insulation performance at extremely low temperatures and cryogenic environment without signs of distortion and contraction.

Additional advantages of the system are its ease of installation, light in weight, clean and seamless appearance. It has also better quality and durable construction. Some insulation materials are constructed with double-sided aluminium covers as outlayer to protect the phenolic foam. For superior thermal sealing, the technique of tongue and groove is applied to join the pipe sections. It also uses a double sealing adhesive or an aluminum/foil sticky tape. This type of pipe insulation foam technology has many other outstanding features which can provide many benefits to any pipe insulation project whether for the home or business application.

Pipe insulation foam technology needs your meticulous study whether you select phenolic, polyurethane or the other materials. There are new research studies regarding the value, relevance and applicability of R-value rating which a decision maker should be aware of. Before you start negotiations with any pipe insulation contractor, you have to know your project’s exact specifications and details regarding your pipe system diagram.

[Top]